Britax Brook - Care and Maintenance

23
IMPORTANT: Before each use, check this stroller and its
components to make sure they are in good condition and good
working order.
Care and Maintenance
Parking Brake & Stroller Adapters
Fabric & Harness
• Check that the parking brake works properly and locks both
wheels securely.
• Clean out any dirt or debris that may prevent the brake or
stroller adapters system from working.
• DO NOT machine wash or dry.
• Spot clean with cold water and mild soap. Air dry to prevent
shrinking.
• DO NOT iron.
• If the stroller gets wet, wipe with a clean cloth or towel to
prevent corrosion.
• DO NOT fold the stroller when wet or damp. Always make sure
that the stroller is dry before storing.
• Wipe the frame with a damp cloth and mild soap. Use clean,
dry cloth or towel to wipe away excess water and soap.
• DO NOT use abrasives, solvents, strong detergents, or
household cleaners. These products can scratch, discolor,
and weaken plastic or cause corrosion on metal surfaces.
• To prevent damage to plastic parts, store away from extreme
heat.
• DO NOT stack other items on top of the stroller.
General Maintenance