18
Britax Child Safety, Inc.
Attaching the Infant Car Seat
1. Ensure that the base is
securely installed.
2. Place the infant car seat
into the base and press
down until a click is heard.
3. Pull up on one side and
then the other of the infant
car seat to ensure that it is
attached securely.
4. Ensure that the carry
handle is in one of the
four locked positions and
check that the recline
angle is still correct.
Removing the Infant Car Seat
1. Pull and hold the release
lever on the back of the
infant car seat.
2. Lift the infant car seat up
from the base.
To Next Page