23
ENDEAVOURS/B-SAFE ULTRA User Guide
CHECKLIST
ü Check that the vehicle belt is tight and that the
infant car seat is secure. The infant car seat is
secure when it moves less than 1 inch (2.5 cm)
front-to-back or side-to-side at the vehicle belt path.
ü Check that the recline angle is correct. The proper
recline angle is achieved when the level line on the
carrier is level to the ground.
ü Check that the vehicle belt is not twisted and that it
is tight and locked.
ü Check that the infant car seat handle is rotated into
any locked position.
5. Push the infant car seat
firmly into the vehicle
seat while removing
all slack from the lap
portion and then the
shoulder portion of the
vehicle belt.
Carrier Only Installation with European
Lap-Shoulder Belt Guide
To Next Page