Britax FRONTIER 85 - Installing with LATCH (Short Path)

28
29
LATCH – Short Path
Before you begin:
Check that your vehicle has LATCH anchors. 9
Check your vehicle owner’s manual for the vehicle’s LATCH *
anchor limits.
Check that your vehicle has a top tether anchor. 9
You MUST always* use the Versa-Tether for children weighing
65 – 85 lbs (29.5 – 38.6 kg).
Britax recommends that the Versa-Tether is used at all times. *
Using the tether will improve the stability of the child seat and
reduce the risk of injury. Check your vehicle owner’s manual for
tether anchor locations.
Remove the Versa-Tether 9
®
hook from the storage clip and
place it over the child seat back to keep it from becoming
pinned between the child seat and vehicle seat during
installation.
Versa-Te ther
(Top Te ther)
Install with LATCH using only the short belt path as shown
above.
Installing the Child Seat: Harness ModeInstalling the Child Seat: Harness Mode