BRIVIS CALL CENTRE WALL CONTROL MANUAL 601 ISSUE 1
29
PROGRAMMABLE TH4110
P
ROGRAM SCHEDULE OVERRIDE
(
TEMPORARY
)
Press the
UP
and
DOWN
arrows to immediately adjust the temperature, this
will temporarily override the temperature setting for the current time period.
The new temperature will be maintained only until the next programmed time
period begins.
To cancel the temporary override at any time press
RUN
.
P
ROGRAM SCHEDULE OVERRIDE
(
PERMANENT
)
Press
HOLD
to permanently adjust the temperature. This will override the
temperature settings for all time periods.
The hold feature turns
OFF
the program schedule and allows you to adjust the
thermostat manually.
Whatever temperature is set will be maintained 24hrs a day until you
manually change it or press
RUN
to cancel hold and resume the program
schedule.
A
DAPTIVE INTELLIGENT RECOVERY
(
AIR
)
Allows the thermostat to learn how long your heater or air conditioner takes to
reach the set temperature. The thermostat turns the unit on at the right time to
reach the desired temperature setting at the scheduled time.
E.g. if the wake time is set for 6am and the temperature at 21. The unit will
turn on before 6am to ensure that the temperature is at 21 by 6am.
To Next Page
Loading...
Need help?
General
