Need help?Do you have a question about the Brivis Touch and is the answer not in the manual?
General| Backlight | Yes |
|---|---|
| Display Type | LCD |
| Control | Touchscreen |
| Programmable | Yes |
| Temperature Range | 5°C to 30°C |
| Installation | Wall-mounted |
Controls the fan operation independently of heating or cooling modes.
Circulates air continuously between heating/cooling cycles when enabled.
Operates the heating system automatically based on programmed schedule settings.
Operates the cooling system automatically based on programmed schedule settings.
Operates the evaporative cooler pump only, without fan circulation.
Operates the evaporative cooler fan only, without pump circulation.
Details automatic operation of the evaporative cooling system to maintain comfort levels.
Allows setting the evaporative cooler to turn ON or OFF within a 24-hour period.
Sets the ON timer for evaporative cooling in Manual or Auto mode.
Sets the OFF timer for evaporative cooling in Manual or Auto mode.
Allows cancellation or modification of previously set evaporative cooler timers.
Sets a single temperature for all zones, controlled by one set point.
Sets independent temperature set points for each zone.
To Next Page
