8
6.5 Evap Timer ON – Manual / Auto
With the system in “EVAP” mode and OFF, press the “Timer” button,
refer Diagram 12.
To set the ON Timer firstly select mode of operation, either MANUAL
or AUTO.
For ON Timer in MANUAL mode the below configuration options
become available to change:
• Fan Speed (Low to High)
• Pump ON or OFF (Press the “PUMP” button to change)
• Set On Time (within next 24 hours)
To save settings and return to the home OFF screen press “Done”. To
cancel Timer setting press “BACK”.
For ON Timer in AUTO mode the below configuration options become
available to change:
• Comfort Level (Dark blue is cooler)
• Set On Time (within next 24 hours)
To Next Page
Loading...
