Brivo ACS100 User Manual

Panel Networking Guide
Introduction
I
Legal Disclaimers ............................................................................ 2
Document Objectives ..................................................................... 4
Terminology ..................................................................................... 4
Registration...................................................................................... 5
Additional Resources ...................................................................... 5
Understanding the Network Environment .................................. 6
Network Requirements .................................................................. 6
Bandwidth Usage ............................................................................ 6
Firewall Considerations .................................................................. 7
-E Control Panels and Proxy Servers ............................................ 7
ACS6000, ACS300,
ACS5000, and IPDC
II
Accessing the Administrative Interface ........................................ 8
Main Tab ........................................................................................ 12
Networking Tab ............................................................................. 13
System Tab .................................................................................... 22
Hardware Tab ................................................................................ 27
Application Tab ............................................................................. 33
Cellular Module Tab...................................................................... 35
Troubleshooting (ACS6000, ACS300, ACS5000, & IPDC) ........... 36
ACS100
III
Accessing the Administrative Interface ...................................... 38
Main Tab ........................................................................................ 40
Networking Tab ............................................................................. 41
System Tab .................................................................................... 48
Hardware Tab ................................................................................ 52
Application Tab ............................................................................. 57
Troubleshooting (ACS100) ........................................................... 59

Brivo ACS100 Specifications

General

Brand	Brivo
Model	ACS100
Category	Control Panel
Language	English

Summary

Legal Disclaimers

Federal Communications Commission (FCC) Compliance

Equipment tested and found to comply with FCC limits for Class B digital devices, designed for protection against harmful interference.

FCC RF Radiation Exposure Statement

Equipment complies with FCC RF radiation exposure limits for an uncontrolled environment with minimum distance of 20cm.

Underwriter Laboratories (UL) Compliance

Brivo controllers comply with UL 294 Standard for access control units, with specific restrictions noted.

Canada-Underwriters Laboratories (C-UL) Compliance

For C-UL Listed applications, installation must follow Part 1 of the Canadian Electrical Code.

Parts and Service

Controllers have no user serviceable parts; lithium battery replacement requires qualified service technicians.

Introduction

Document Objectives

Provides all the information needed to operate a Brivo control panel on a Local Area Network (LAN) connected to the Internet.

Understanding the Network Environment

Describes the basic operation of the control panel in an IP network environment.

Firewall Considerations

Explains how the -E panel operates through firewalls and considerations for proxy servers.

ACS6000, ACS300, ACS5000, & IPDC Control Panels

Accessing the Local Administrative Interface

Describes how to connect to the Brivo control panel local Administrative Interface (WebCLI).

Networking Tab

The Network Status page is useful for diagnosing various network conditions.

IP Configuration

Explains how to change network settings if custom settings are required.

Hardware Tab

Allows checking hardware status, LED settings, event rate control, and OSDP reader firmware upgrade.

Application Tab

Access logs, activate Office Mode, and use tools for diagnosing control panel problems.

Troubleshooting (ACS6000, ACS300, ACS5000, & IPDC)

Material to help ensure that the Brivo control panel networking is operating properly.

ACS100

Accessing the Local Administrative Interface

Describes how to connect to the ACS100 control panel local Administrative Interface.

Networking Tab

The Network Status page is useful for diagnosing various network conditions for the ACS100.

IP Configuration

Explains how to change network settings if custom settings are required for the ACS100.

Hardware Tab

Allows checking ACS100 hardware status, LED settings, and event rate control.

Application Tab

Access ACS100 logs and use tools for diagnosing control panel problems.

Troubleshooting (ACS100)

Material to help ensure that the ACS100 control panel networking is operating properly.