Brivo B-ACS6100R-E User Manual

Brivo ACS6100
Installation Manual
Introduction
I
Legal Disclaimers ............................................................................ 2
Introduction ..................................................................................... 4
Pre-Installation Procedures
II
Understand the function of the B-ACS6000-MBE/MBS .............. 6
Understand B-ACS6000-MBE/MBS product compatibility ......... 6
Verify client site is ready for installation ...................................... 6
Verify shipping contents ................................................................ 7
Planning the installation ................................................................ 9
Follow safety precautions ............................................................ 11
General Assembly Procedures
III
Assemble and mount chassis ...................................................... 12
Connect the main control board and all expansion boards .... 16
ACS6000 control panel tamper switches ................................... 17
Connect the battery leads to the power supply ........................ 19
Wire the AC/DC power adapter to the power supply ............... 19
Powering and Testing
Procedures
V
Power up the control panel ......................................................... 36
Installation Procedures
IV
Establish CAN Bus wiring ............................................................. 21
Wire doors ..................................................................................... 24
Wire OSDP Readers ...................................................................... 27
Wire input output boards ............................................................ 33
Mount and connect the Wi-Fi antenna ....................................... 34
Ground the chassis ....................................................................... 35
Conguration Procedures
V
Connecting a laptop to the main control board admin port ... 38
Connect the LAN to the main control board ............................. 38

Brivo B-ACS6100R-E Specifications

General

Brand	Brivo
Model	B-ACS6100R-E
Category	Control Panel
Language	English

Summary

Pre-Installation Procedures

Safety Precautions and Warnings

Details critical safety warnings related to fire code, environment, and secure mode.

General Assembly Procedures

Board Connections to Power Supply

Guides the connection of control and expansion boards to the power supply.

Battery Lead Connections

Instructions for connecting backup battery leads to the power supply board.

AC/DC Power Adapter Wiring

Details wiring the AC/DC power adapter to the power supply board for operation.

Installation Procedures

Establish CAN Bus Wiring

Provides instructions for setting up the CAN bus communication wiring between boards and chassis.

CAN BUS Addressing Switches

Explains how to configure CAN bus addresses using the SW1 switch.

Door Wiring (Wiegand Readers)

Guides the wiring of doors using Wiegand readers to the control panel.

Door Board Wiring Specifics

Provides specific wiring instructions for the Door Board's REX, lock relay, and contact terminals.

Auxiliary Inputs and OSDP/RS-485 Wiring

Covers wiring for auxiliary inputs, OSDP readers, and RS-485 functionality.

OSDP Reader and Transceiver Wiring

RS-485 and Duplex Mode Switch Configuration

RS-485 Termination and Wet/Dry Switch Configuration

Reader Wiring (Wiegand and OSDP)

Provides detailed wiring guides for Wiegand and OSDP readers.

Install MOVs (Transient Noise Suppression)

Input Output Board Wiring

Grounding the Control Chassis

Powering and Testing Procedures

Control Panel Power Up and Initial Checks

Verify Power Indicators and Heartbeats

Configuration Procedures

Laptop Connection to Admin Port

LAN Network Connection