Brivo B-ACS6100R-S User Manual

Brivo ACS6100
Installation Manual
Introduction
I
Legal Disclaimers ............................................................................ 2
Introduction ..................................................................................... 4
Pre-Installation Procedures
II
Understand the function of the B-ACS6000-MBE/MBS .............. 6
Understand B-ACS6000-MBE/MBS product compatibility ......... 6
Verify client site is ready for installation ...................................... 6
Verify shipping contents ................................................................ 7
Planning the installation ................................................................ 9
Follow safety precautions ............................................................ 11
General Assembly Procedures
III
Assemble and mount chassis ...................................................... 12
Connect the main control board and all expansion boards .... 16
ACS6000 control panel tamper switches ................................... 17
Connect the battery leads to the power supply ........................ 19
Wire the AC/DC power adapter to the power supply ............... 19
Powering and Testing
Procedures
V
Power up the control panel ......................................................... 36
Installation Procedures
IV
Establish CAN Bus wiring ............................................................. 21
Wire doors ..................................................................................... 24
Wire OSDP Readers ...................................................................... 27
Wire input output boards ............................................................ 33
Mount and connect the Wi-Fi antenna ....................................... 34
Ground the chassis ....................................................................... 35
Conguration Procedures
V
Connecting a laptop to the main control board admin port ... 38
Connect the LAN to the main control board ............................. 38

Brivo B-ACS6100R-S Specifications

General

Model	B-ACS6100R-S
Type	Access Control Panel
Power Supply	12V DC, 24V DC
Communication	RS-485, Ethernet
Network Interface	10/100 Ethernet
Inputs	4
Outputs	4
Form Factor	Wall-mountable
Supported Readers	Wiegand
Memory	256MB Flash
Processor	ARM Cortex
Compliance	UL 294, FCC, CE
Operating Temperature	32°F to 122°F (0°C to 50°C)

Summary

Pre-Installation Procedures

Verify Site Readiness

Plan Installation Site and Layout

Follow Safety Precautions

Essential safety precautions for installing the B-ACS6000-MBE/MBS control panel, covering fire code and environmental factors.

Installation Procedures

Establish CAN Bus Wiring

Wire Doors (Wiegand Readers)

Detailed instructions for wiring door connections and Wiegand readers.

Wire OSDP Readers

Wiring instructions for OSDP readers and Allegion Transceivers using RS-485.

Wire Input Output Boards

Ground the Control Chassis

Powering and Testing Procedures

Power Up and Check Indicators

Steps for powering up the control panel and verifying power indicators and heartbeats.

Configuration Procedures

Connect Laptop to Admin Port

Connect a laptop to the MAIN CONTROL BOARD's ADMIN port for configuration and debugging.

Connect LAN to Control Board