Windows Driver and Management Application InstallationNetXtreme User Guide
Broadcom
®
October 2020 • 2CS57XX-CDUM518 Page 14
Using Silent Installation
Refer to the readme.txt file in the installation folder for command line instructions.
Modifying the Driver Software
To modify the driver software
1. In Control Panel, double-click Add or Remove Programs.
2. Click Broadcom Drivers and Management Applications, and then click Change.
3. Click Next to continue.
4. Click Modify, Add, or Remove to change program features. This option does not install drivers for new
adapters. For information on installing drivers for new adapters, see Repairing or Reinstalling the Driver
Software.
5. Click Next to continue.
6. Click on an icon to change how a feature is installed.
7. Click Next.
8. Click Install.
9. Click Finish to close the wizard.
10. The installer will determine if a system restart is necessary. Follow the on-screen instructions.
Notes:
• All commands are case sensitive.
• For detailed instructions and information about unattended installs, refer to the Silent.txt file in the
Driver_Management_Apps_Installer folder.
Note: The REINSTALL switch should only be used if the same installer is already installed on the
system. If upgrading an earlier version of the installer, use
setup /s /v/qn as listed above.
To Next Page
Loading...
Need help?
General
