
Do you have a question about the Broadcom 96 Series and is the answer not in the manual?
Details the primary RAID and eHBA features supported by the adapters.
Lists operating systems compatible with the tri-mode storage adapters.
Explains LED management support for SAS/SATA and NVMe backplanes.
Covers concurrent SAS, SATA, and PCIe (NVMe) device operation.
Describes dedicated SAS phy management and wide port creation.
Details NVMe drive and PCIe switch direct-attach options.
Explains industry-standard backplane management via UBM specification.
Details support for VPP backplane management for legacy implementations.
Describes sideband signal usage and pin settings for SFF-8654 connectors.
Guides on selecting proper cables for backplane types and connectors.
Details pinouts for external adapters connecting to SAS and PCIe.
Permits only authenticated firmware to execute on the adapter.
Allows adapter to prove its identity for platform attestation.
Process for server challenging adapter for proof of authenticity.
Security Protocol and Data Model capabilities for secure communication.
Details connectors and LEDs for the 9670W-16i adapter.
Details connectors and LEDs for the 9670-24i adapter.
Explains the 2x3 auxiliary power connector for the 9670-24i adapter.
Details connectors and LEDs for the 9660-16i adapter.
Details connectors and LEDs for the 9620-16i adapter.
Details connectors and LEDs for the 9600-24i adapter.
Details connectors and LEDs for the 9600-16i adapter.
Details connectors and LEDs for the 9600-8i8e adapter.
Details connectors and LEDs for the 9600W-16e adapter.
Details connectors and LEDs for the 9600-16e adapter.
Lists thermal, atmospheric, and environmental conditions.
Details power supply requirements and consumption for adapters.
Lists adapter marks, certifications, and compliance standards.
States compliance with FCC rules for digital devices.
Covers UL flammability rating and voltage limits.
Shows drawing and pinout for cable 05-60001-00 (SFF-8654 to SFF-8612).