Need help?Do you have a question about the Brocade Communications Systems FCX624S-HPOE and is the answer not in the manual?
Overview of the RFS7000 Controller for large enterprises and data centers, including capacity and clustering benefits.
Guide on connecting to the switch's console port using a PC and terminal emulation.
Steps for performing basic configuration on the Brocade FCX switch, including entering modes.
Instructions on how to configure VLANs and tag ports on the Brocade FCX switch.
Steps to configure switch interfaces for Power over Ethernet (PoE) and set port names.
Guide on connecting to the RFS7000 Controller's serial port for configuration.
Steps to set the IP address for the RFS7000 Controller via console or command line.
Steps for basic configuration of the RFS7000 Controller through its web interface.
Steps to adopt the Brocade AP300 into the RFS7000 controller.
Steps to set the IP address for AP7131/AP5181 access points.
Guide to configuring controller pairing for APs when DHCP is not used.
Steps to adopt the AP7131 access point into the RFS7000.
General| Power over Ethernet | Yes |
|---|---|
| PoE Budget | 370 W |
| Switching Capacity | 128 Gbps |
| Product Type | Switch |
| Layer | Layer 3 |
| Ports | 24 x 10/100/1000Base-T |
| VLANs Supported | 4096 |
| Jumbo Frames | 9216 bytes |
| Power Supply | Internal power supply |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% (non-condensing) |
To Next Page
