4. INSTALLATION
4.1 LOCATION
1. Place the unit on a firm, level surface in an area with at least 30cm of free
space around it to allow for proper air circulation.
2. Never install the unit where it could be subject to：
⚫ Heat sources such as radiators, heat registers, stoves or other products
that products that produce heat.
⚫ In an area where oil or water may be splashed
⚫ Direct sunlight
⚫ Mechanical vibration or shock
⚫ Excessive dust
⚫ Lack of ventilation, such as cabinet or bookcase
⚫ Uneven surface
WARNING
Install the unit in rooms which exceed 6 m².
Do not install the unit in a place where inflammable gas may leak.
NOTE
The manufacture may provide other suitable example or may provide additional
information about the refrigerant odour.
To Next Page
Loading...
