6. WATER DRAINAGE
Water Tank:
When the water tank is full, the water full indicator light will turn on, the
machine will stop running automatically and the buzzer will beep 15
times to remind the user to empty the water tank in time.
Emptying the Drainage Tank
1. Lightly press on the sides of the tank with both hands and pull the tank out
gently.
2. Discard the collected water
NOTE
1. DO not remove the float from the water tank. The water full sensor will no
longer be able to detect the water level correctly without the float and water
may leak from the water tank.
2. If the drainage tank is dirty, wash it with cold or lukewarm water. Do not use
detergent, scouring pads, chemically treated dust cloths, gasoline, benzene,
thinner, or other solvents, as these can scratch and damage the tank and
cause water leakage
To Next Page
Loading...
