The following instructions are based on the PS4 controller.
Buttons that can be set as Turbo function buttons include: ╳, ○,
□, △, L1, R1, L2, R2, L3, R3 (hereinafter referred to as FK)
Step 1. Enter setting mode:
Press SHARE＋PS Key, the RED LED of the Wingman FGC will
be permanently on.
Step 2. Choosing a FK button: (e.g. Setting ╳ as turbo function)
Hold SHARE, then press ╳
Step 3. Completing Setting Mode:
Release all buttons, then press OPTIONS to save settings.
Step 4. Exit setting mode:
Press PS Key, the BLUE LED of the Wingman FGC will be
permanently on.
Turbo Function Settings
Step 1. Enter setting mode:
Press SHARE＋PS Key, the RED LED of the Wingman FGC will
be permanently on.
Step 2. Erasing all Turbo function buttons
Press SHARE＋OPTIONS
Step 3. Exit setting mode:
Press PS Key, the BLUE LED of the Wingman FGC will be
permanently on.
Cancelling Turbo Function
Turbo Function Settings
6
To Next Page
Loading...
