Brook WINGMAN - Turbo Frequency Setting

The following instructions are based on the PS4 controller.
Step 1. Enter the setup mode
Press SHARE＋PS Key, the RED LED of the Wingman FGC will
be permanently on.
Step 2. Turbo Frequency Setting
The Up button increases frequency while the Down button
decreases it.
To increase frequency: press both SHARE and the Up buttons,
and the indicator will ash faster.
To decrease frequency: press both SHARE and Down buttons,
then the indicator will ash slower.
Step 3. Save
Press OPTIONS to save your settings.
Step 4. Exit
Press the PS Key button to leave Turbo setup mode. The RED
LED indicator will then turned o.
Turbo Frequency Setting
7