Brook WINGMAN - Button Remap Settings

The following instructions are based on the PS4 controller.
Buttons that can be Remap include: ╳, ○, □, △, L1, R1, L2, R2,
L3, R3 (hereinafter referred to as FK)
Step 1. Enter setting mode:
Press OPTIONS＋PS Key, the RED LED of the Wingman FGC
will be permanently on.
Step 2. Choosing a FK button: (e.g. Setting □ as ╳+○)
Press □
Step 3. Choosing button to be set:
Hold SHARE, then press ╳+○.
Step 4. Completing setting mode:
Release all buttons, then press OPTIONS to save settings.
Step 5. Exit setting mode:
Press PS Key, the BLUE LED of the Wingman FGC will be
permanently on.
Step 1. Enter setting mode:
Press OPTIONS＋PS Key, the RED LED of the Wingman FGC
will be permanently on.
Step 2. Erasing all settings for Button Remap Settings.
Press SHARE＋OPTIONS.
Step 3. Exit setting mode:
Press PS Key, the BLUE LED of the Wingman FGC will be
permanently on.
Button Remap Settings
Cancelling Button Remap Settings
Button Remap Settings
8