12
4. Press and hold the volume up (+) and volume down (-) buttons
on the remote. The red light on the remote will blink as the
remote pairs with the projector.
• When paired, the remote icon on the projector's home screen
will appear blue
.
• When not paired, the remote icon on the projector's home
screen will appear gray
.
IMPORTANT: If pairing fails, press the Bluetooth reset button on
the back of the projector and restart the pairing process.
CONTROLS AND FUNCTIONS
1. [Status light]
Displays remote usage information
2. [Power] Power projector on or off
3. [Up] or [Down], Move up or down; [Left] or [Right] Move
left or right
4. [Home] Return to the home screen
5. [Mouse] Use the remote as a mouse
6. [Volume down] Decrease volume
7. [Bluetooth mode] Turns on Bluetooth speaker mode
To Next Page
Loading...
