Brookstone Big Shot - CONNECTING A BLUETOOTH SPEAKER; VOLUME ADJUSTMENTS; IMAGE ADJUSTMENTS; CALIBRATE THE AUTOMATIC FOCUS ADJUSTMENT

24
CONNECTING A BLUETOOTH SPEAKER
1. Set the Bluetooth speaker to discoverable mode.
2. Select
“Settings” from the projector’s home screen.
3. Scroll down to “Bluetooth” on the settings menu page.
4. Select “Search for devices.”
5. Select your Bluetooth speaker from the list of
available devices.
VOLUME ADJUSTMENTS
The volume level of the projector can be adjusted using the volume
controls on the included remote control. Press the Volume up (+)
button or the Volume down (-) button to adjust to the preferred
volume level.
IMAGE ADJUSTMENTS
The projector will automatically adjust the image's focus.
CALIBRATE THE AUTOMATIC FOCUS ADJUSTMENT
Press and hold the Auto Focus button on the remote and allow
the projector a few seconds to make the required adjustments.