30
connected properly. Also check that the Bluetooth speaker is
not muted.
The projector’s remote control isn’t functioning.
•If the status light on the remote flashes each time your press
a button on the remote, the problem is not with your remote.
•Try moving closer to the projector with the remote.
•Check that the batteries are functioning and inserted
properly.
The projector is not projecting.
•Check that there are no obstructions between the projector
and the projection surface.
•Power the unit off, press the restart button, and power the
unit back on.
•If connected to the projector with a cabled HDMI connection:
- Check that the HDMI compatible cable is securely plugged into the
HDMI port on your device and the HDMI port on the projector.
- Check that you are using any necessary adapters or cables to
connect your device. Also check with your device manufacturer to
ensure your device supports HDMI video out and you are using
any required cables and/or adapters to make the connection. If an
adapter is required, power down the projector, add the adapter, and
then turn the projector back on.
To Next Page
Loading...
