Brookstone iConvert® - Troubleshooting

15
TRoUbleshooTInG
PROBLEM POSSIBLE CAUSE SOLUTION
Showing
“No Space”
on monitor.
No video is
saved when
pressing the
record button.
Monitor is
not displaying
normally.
SD/SDHC card
is not inserted.
SD/SDHC card
is not formatted.
SD/SDHC card is
write protected.
No video signal input.
The unit is not
on the correct
NTSC/PAL format.
TV INPUT and OUTPUT
are plugged into the
same place.
Insert a SD/SDHC card.
Format the SD/SDHC card.
Unlock the write protect
on the SD/SDHC card.
Check and plug the
video-in socket.
Switch the format to the correct
one for your system.
Plug into different devices, or only
use one of INPUT and OUTPUT
on the device at a time.