30
The projector’s remote control isn’t functioning.
• If the status light on the remote flashes each time your press a button on the remote,
the problem is not with your remote.
• Try moving closer to the projector with the remote.
• Check that the batteries are functioning and inserted properly.
• Try re-pairing the remote (see “Operating the Projector” on page 15).
The projector is not projecting.
• Check that there are no obstructions between the projector and the projection surface.
• Check the battery charge on the projector. If depleted, try powering the projector on
while the unit is plugged into power.
• If plugged into power, check that the charging indicator light on the unit is illuminated.
• Power the unit off, press the restart button, and power the unit back on.
• If connected to the projector with a cabled HDMI connection:
- Check that the HDMI cable is securely plugged into the HDMI port on your device and the
HDMI port on the projector.
- Check that you are using any necessary adapters or cables to connect your device. Also check
with your device manufacturer to ensure your device supports HDMI video out and you are
To Next Page
Loading...
