InseRTInG The baTTeRIes
Remove the battery compartment cover by pushing the latch and lifting
the cover off.
Insert 3 AAA batteries according to the polarity indicators.
Replace the battery compartment cover by inserting the tabs into the slots
and snapping the latch securely back into place.
aboUT MoshI's voIce acTIvaTIon
When Moshi is plugged in using the included AC adapter, it will respond "voice
trigger mode is enabled." This will allow you to activate all the commands using
your voice. Please make sure the switch on the back is set to "IVR" mode.
When using battery power, move the switch to "Touch."
Note: When using the clock on battery power, the voice trigger mode is
disabled and the screen must be pressed to initially activate Moshi.
1.
2.
3.
9
To Next Page
Loading...
