18
Massage programs and selections
Changing the massage program
You may change from one massage program
to another at any time without having to
wait for it to complete. Selecting a different
program during another program will cause
the rollers to return to their storage position
and begin the newly selected program.
However, changing between programs
will not reset the timer.
Stopping a massage session
Press the [ ] button to stop all massage
functions. The rollers will move back to the
storage position and all air bags will deflate,
ending the massage. The [
] button will
change to a yellow color and go into
standby mode.
Pausing a massage session
To pause a massage, press the [ ] button
on the controller. This will temporarily freeze
all operations. Press the [
] button again
to resume massage.
Note
• In an emergency or any malfunction,
press [
] button to stop the massage
immediately. Rollers will not return to
storage position. Press the [
] button
to bring the rollers to the storage
position again and turn off the
main switch.
Caution
• To avoid accidents and malfunction
of the uAstro2 Massage Chair, switch
off the Main Switch and disconnect the
power plug from the electrical outlet
after use.
• Always disconnect the power plug
from the electrical outlet if the
uAstro2 Massage Chair is not
being used for a period of time.
To Next Page
Loading...
