10
Zipper
Velcro
Backrest pad
Preparation before use
Setting up the uAstro2
• uAstro2 is packed with its
backrest reclined. The armrest
unit is packed separately.
• Before use, ensure that the backrest
is raised fully to its upright position.
• Unzip the zipper located at the top
of the backrest pad near the seat.
• Disengage the Velcro
®
located at the
middle of the backrest pad to remove
or insert the cushion pad.
• Align and engage the Velcro on
the backrest pad to the Velcro
on the backrest.
Placing the cushion pad
• Removable cushion pad is provided to
achieve the type of massage you want.
• If you feel the massage is too light,
remove the cushion pad.
• If you feel the massage is too strong,
insert the cushion pad.
Raise backrest to its
upright position
Cushion pad
Velcro
Backrest
Backrest pad
To Next Page
Loading...
