Brookstone Rover 2.0 - Sharing Photos; Photo Sharing Options

PATH PATH
RECORDING A PATH/PLAYING A PATH
The Rover 2.0 can record up to 60 seconds of a driving route, and then repeat it all
by itself!
1. To record a path, press the Make Path
PATH
button and drive the Rover 2.0 on the
route you want to record.
2. After you complete your route, press the Make Path
PATH
button again to save.
3. Press the Play Path
PATH
to play the recorded route and the Rover 2.0 will
automatically drive the route you recorded – all by itself.
4. Double tap
PATH
to play the Path in a loop. Press
PATH
to stop the Path play.
Note: If the Rover 2.0 is reset, or the batteries are removed, the saved route
will be erased.
TALK
TWO-WAY RADIO
Rover 2.0 can talk! Press and hold the
TALK
button and talk into your device to speak
through the Rover 2.0. Then, just release the
TALK
button to listen.
BRIGHTS
HEADLIGHTS AND TAIL LIGHTS
Press the
BRIGHTS
button to turn the headlights and tail lights on and off.
19