Brother 420CN - MFC Color Inkjet - Scan to OCR

NETWORK SCANNING 7 - 7
Scan to OCR
When you select Scan to OCR your document will be scanned and
sent directly to the PC you designated on your network. The
ControlCenter2.0 will activate ScanSoft
®
OmniPage
®
OCR and
convert your document into text for viewing and editing from a word
processing application on the designated PC. You can change the
Scan configuration. (See
OCR (Word Processing program)
on page
3-8.)
1
Load your document.
2
Press (
Scan
).
3
Press
▲
or
▼
to select
Scan to OCR
.
Press
Menu/Set
.
4
Press
▲
or
▼
to select the destination PC you want to send to.
Press
Menu/Set
.
If the LCD prompts you to enter a Pin number, enter the 4-digit
Pin number for the destination PC on the control panel.
Press
Black Start
or
Color Start
.
The machine will start the scanning process.
For Network Scanning the ControlCenter2.0 selections are used
only for configuring the Scan button. You will not be able to
initiate a network scan from the ControlCenter2.0.
Scan to OCR