USING YOUR MACHINE WITH A MACINTOSH
®
8 - 43
MFC Remote Setup
(Mac OS
®
X 10.2.4 or greater)
(not available for MFC-210C)
The MFC Remote Setup application enables you to configure many
MFC settings from a Macintosh
®
application. When you access this
application, the settings on your machine will be downloaded
automatically to your Macintosh
®
and displayed on your computer
screen. If you change the settings, you can upload them directly to
the machine.
OK
This starts the process of uploading the data to the machine and
exiting the remote setup program. If an error message is displayed
enter the correct data again. Click OK.
Cancel
This exits the remote setup application without uploading the data to
the machine.
The ‘MFC Remote Setup’ application icon is in Macintosh
HD/Library/Printers/Brother/Utilities.
To Next Page
Loading...
