Brother 9840CDW - Color Laser - All-in-One - Selecting Your Language (Canada Only); Setting the LCD Contrast; Sending in the Product Registration and Test Sheet (USA Only)

Setting Up the Machine
11
11 Selecting your language
(Canada only)
1 Press Menu.
2 Press 0.
3 Press 0.
4 Select your language (English or French ) by
using or and then press OK.
5 Press Stop/Exit.
12 Setting the LCD contrast
You can change the contrast to help the LCD look
lighter or darker.
1 Press Menu.
2 Press 1.
3 Press 8.
4 Press to increase the contrast.
—OR—
Press to decrease the contrast.
Press OK.
5 Press Stop/Exit.
13 Sending in the product
registration and test sheet
(USA only)
1 Fill out the Product Registration and Test
Sheet.
2 Place the sheet face up in the Automatic
Document Feeder.
Note
Make sure (Fax) is illuminated in Blue.
3 Enter the toll-free fax number:
1-877-268-9575.
4 Press Start.
Note
• You will receive a confirmation fax of your Product
Registration.
• You can also register your product online using the
On-Line Registration link from the installation
CD-ROM or go to www.brother.com/registration
.
Now go to
the next page to install the driver and software.