To Next PageTo Next PageWhy my computer cannot find the Brother DCP 585CW - Color Inkjet - All-in-One/print server?
The firewall on your computer might be blocking the necessary network connection. To solve this, disable the firewall and reinstall the drivers.
What to do if I get an error during printing on my Brother DCP 585CW - Color Inkjet - All-in-One?
If you encounter an error during printing, it might be because other users are printing large amounts of data. The printer will be unable to accept your print job until the current printing is finished. Try executing the print job again after the other jobs are completed.
How to fix Brother DCP 585CW - Color Inkjet - All-in-One when print job is not printed?
A print job not being printed may be the result of mismatched or duplicate IP addresses. Verify that the print server is on your network.
How to fix the network scanning feature that does not work in Windows for Brother DCP 585CW - Color Inkjet - All-in-One All in One Printer?
If the network scanning feature isn't working in Windows, the firewall settings on your PC may be rejecting the necessary network connection for network printing, network scanning, and PC Fax. Follow the instructions to configure Windows Firewall.
What to do if the Brother DCP 585CW - Color Inkjet - All-in-One All in One Printer print server is not found during setup by the Wireless Device Setup Wizard?
Reset the print server back to its default factory settings and try again.
What to do if the Brother All in One Printer print server is not found during setup of the network print software installation?
Make sure you have completed the IP address setting and wireless network settings of the Brother print server according to Chapter 3 of this User’s Guide before installing the network print software or printer driver.
What to do if the CD-ROM with Brother DCP 585CW - Color Inkjet - All-in-One drivers does not start automatically?
Execute Start.exe in the root directory of the CD-ROM.
General| Print Technology | Inkjet |
|---|---|
| Duplex Printing | Manual |
| Wireless Printing | Yes |
| Functions | Print, copy, scan |
| Max Print Resolution | 6000 x 1200 dpi |
| Max Scan Resolution | 1200 x 2400 dpi |
| Media Types | Plain Paper, Photo Paper, Envelopes, Labels |
| Operating Systems Supported | Windows, Mac |
| Maximum Scanning Resolution | 1200 x 2400 dpi |
| Connectivity | Wi-Fi |
Explains IP addressing, subnet masks, and gateway configuration for network setup.
Outlines configuration steps using charts, BRAdmin Light, and Remote Setup utilities.
Covers step-by-step charts for Infrastructure and Ad-hoc modes, and setup methods.
Details configuration via control panel Setup Wizard, SES/WPS/AOSS, PIN Method, and installer.
Steps for configuring wireless settings in infrastructure mode using the installer.
Steps for configuring wireless settings in ad-hoc mode using the installer.
Guides through the Wireless Device Setup Wizard, including network selection and security settings.
Steps for configuring wireless settings in infrastructure mode using the Macintosh installer.
Steps for configuring wireless settings in ad-hoc mode using the Macintosh installer.
Guides through the Wireless Device Setup Wizard for Macintosh, including network selection and security.
Step-by-step guide to reset all network settings to factory defaults.
Using Remote Setup and BRAdmin Light to change print server settings on Macintosh.
Guides for troubleshooting wireless connection problems and LDAP server connectivity issues.
