Brother DCP 585CW - Color Inkjet - All-in-One - Ad-hoc Mode Setup via Macintosh Installer

Wireless Configuration for Macintosh
®
using the Brother installer application (Not available for MFC-5490CN and MFC-5890CN)
69
5
Configuration in Ad-hoc Mode 5
Before configuring the wireless settings 5
IMPORTANT
If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Use Menu, a or b to choose Network, press
OK. Press a or b to choose Factory Reset, press OK. Choose Yes to accept the change. For
Touchscreen models, press MENU, Network, a or b to display Factory Reset then press
Factory Reset, and choose Yes to accept the change. The machine will restart automatically.
Configure the wireless settings 5
a Turn on the machine by plugging in the power cord.
b Press Menu.
Press a or b to choose Network, press OK.
Press a or b to choose Network I/F, press OK.
Choose WLAN.
(For Touchscreen models)
5
Press MENU. Press Network. Press Network I/F and then press WLAN.
c Turn on your Macintosh
®
.
d Put the supplied CD-ROM into your CD-ROM drive. Double-click the MFL-Pro Suite icon on your
desktop.
Item Example Record the current wireless network settings
Communication mode: (Ad-hoc) Ad-hoc
Network name: (SSID / ESSID) HELLO
Authentication method:
(Open system)
Open system
Encryption mode:
(None / WEP)
WEP
Network key: (Encryption key, WEP key) 12345