Brother DCP 585CW - Color Inkjet - All-in-One - Configuration Using the SES;WPS;AOSS Control Panel Menu (One-Push Method); Before Configuring the Wireless Settings; Configure the Wireless Settings

Wireless Configuration for Macintosh
®
using the Brother installer application (Not available for MFC-5490CN and MFC-5890CN)
65
5
Configuration using the SES/WPS/AOSS control panel menu
(One-Push method)
5
Before configuring the wireless settings 5
IMPORTANT
If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Use Menu, a or b to choose Network, press
OK. Press a or b to choose Factory Reset, press OK. Choose Yes to accept the change. For
Touchscreen models, press MENU, Network, a or b to display Factory Reset then press
Factory Reset, and choose Yes to accept the change. The machine will restart automatically.
Configure the wireless settings 5
a Turn on the machine by plugging in the power cord.
b Press Menu.
Press a or b to choose Network, press OK.
Press a or b to choose Network I/F, press OK.
Choose WLAN.
(For Touchscreen models) 5
Press MENU. Press Network. Press Network I/F and then press WLAN.
c Turn on your Macintosh
®
.
d Put the supplied CD-ROM into your CD-ROM drive. Double-click the MFL-Pro Suite icon on your
desktop.
e Double-click the Utilities.