Brother DCP 585CW - Color Inkjet - All-in-One - Wireless Configuration Methods Overview

To Next Page

To Previous Page

Configuring your machine for a wireless network (Not available for MFC-5490CN and MFC-5890CN)

Step by step chart for wireless network configuration 3

For Infrastructure mode 3

a Confirm your network environment. (See page 23.)

b Confirm your wireless network setup method. (See page 24.)

c Configure your machine for a wireless network. (See page 27.)

Wireless configuration and installing drivers and software have been completed.

 Infrastructure mode

Connected to a computer with an access point

 Ad-hoc mode See page 22.

Connected to a wireless capable computer

without an access point

Using the Setup

Wizard from the

control panel

(Recommended)

Using the

SES/WPS/AOSS

control panel

Using the PIN

Method of Wi-Fi

Protected

Setup™

Using the Brother

installer

application

Temporarily using

a network cable

Using the

SES/WPS/AOSS

control panel

See page 27. See page 31. See page 35.

For Windows

(See page 38.)

For Macintosh

(See page 58.)

For Windows

(See page 45.)

For Macintosh

(See page 65.)

Installing drivers and software (See the Quick Setup Guide.)

Other manuals for Brother DCP 585CW - Color Inkjet - All-in-One