1. This book was prepared based on information available in June 2005.
2. Parts are subject to changes in design without prior notice.
3. Parts supplied as complete assemblies are circled by a dotted line .
A. Machine body ................................................... 1
B. Upper shaft and needle bar mechanism ..........
3
C1. Feed mechanism .............................................
5
C2. Feed mechanism .............................................
7
C3. Feed mechanism .............................................
11
C4. Feed mechanism .............................................
13
D1. Work clamp lifter mechanism ........................... 15
D2. Work clamp lifter mechanism ........................... 17
D3. Work clamp lifter mechanism ........................... 19
E. Lower shaft mechanism ................................... 21
F. Lubrication .......................................................
23
G. Threading mechanism .....................................
27
H. Bobbin winder mechanism ............................... 29
J. Thread trimmer mechanism ............................. 31
K. Thread wiper mechanism ................................. 35
L. Tension release mechanism ............................ 37
M1. Control box mechanism ...................................
39
M2. Control box (PCB) mechanism ......................... 41
N. Power switch mechanism ................................
43
P. Air pressure mechanism ..................................
45
Q. Power supply equipment mechanism ..............
47
R. Operation panel mechanism ............................ 49
S. Motor mechanism ............................................
51
T. Foot switch pedal mechanism .......................... 53
U. Programmer ..................................................... 55
V1. Attachment set (Option parts) .......................... 57
V2. Attachment set (Option parts) .......................... 59
Z. Accessories ...................................................... 61
Wa. Warning labels .................................................
65
Sp. Different parts list ............................................. 66
Ga. Gauge parts list .................................…...........
68
Index ................................................................ 69
Notes for using this parts book
CONTENTS