EasyManuals Logo

Brother BES-940 Oiling Procedures

Brother BES-940
1 page
Page #1 background imageLoading...
Page #1 background image
B
B
E
E
S
S
-
-
1
1
2
2
4
4
0
0
,
,
1
1
2
2
4
4
1
1
,
,
9
9
6
6
0
0
,
,
9
9
6
6
1
1
,
,
9
9
6
6
2
2
,
,
9
9
6
6
2
2
,
,
9
9
6
6
3
3
1
1
2
2
6
6
0
0
,
,
1
1
2
2
6
6
1
1
,
,
1
1
2
2
6
6
2
2
,
,
1
1
2
2
6
6
2
2
Daily - (Performed once at start of the day and every 4 hours of operation.)
R
otary hook:
1. With power turned off.
(This makes it easier to turn the rotary hook by hand.)
2. Open bobbin case cover and rotate the outer part of the rotary hook counter clockwise
until you see what is called the raceway.
(This is the raised black portion.)
3. Place a small drop of oil on the raceway (A).
4. Close bobbin case cover and turn on machine.
(Rotary hooks will automatically orientate themselves
back to the correct position.)
Weekly - (Performed once a week based on 40 hours.)
N
eedle bars:
1. Remove the front plate that has the “BROTHER” logo on it by removing one screw and
loosening the other. The plate will now slide off to the side.
2. Oil each needle bar as shown in the picture on the left, by placing a small drop of oil on
each needle bar in the two locations (B). You will have to pull down each needle bar to oil
the top of each bar as illustrated.
Thread take up busing and connecting rod
:
1. Place 5-6 drops of oil in the channel behind each head to lubricate the connecting rod (C).
2. Place 1-2 drops on the thread take up bushing (C
). Place oil between black block and shiny silver
p
iece with hex screw.
For Technical Assistance Please Call Toll Free 1-877-4BROTHER
Rotary Hook
Thread take up bushing
Connecting rod channel
A
B
B
C
C

Other manuals for Brother BES-940

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother BES-940 and is the answer not in the manual?

Brother BES-940 Specifications

General IconGeneral
BrandBrother
ModelBES-940
CategorySewing Machine
LanguageEnglish

Related product manuals