Brother DCP-115C Quick Setup Guide

Installing the Driver & Software
24
STEP2
Macintosh
®
Network
Macintosh
®
10 Carefully guide the network cable to the trench
as shown below, following the trench around
and toward the back of the machine.
Then, connect the cable to your network.
Improper Setup
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Note
In case of using both USB and LAN cables, route
both cables through the trench.
11 Lift the scanner cover to release the lock.
Gently push the scanner cover support down
and close the scanner cover.
12 Turn on the machine by plugging in the power
cord.
13 Choose Network and then click OK.
14 If you want to use the machine’s Scan key to scan
over the network you must check
Register your
computer with the "Scan To" functions at the
machine
box. You must also enter a name for
your Macintosh
®
in Display Name . The name
you enter will appear on the machine’s LCD when
you press the
Scan key and choose a scan
option. You can enter any name up to 15
characters long. (For more information on
network scanning, see Chapter 11 of the
Software User's Guide on the CD-ROM.)
15 Click Browse.
16 Choose your model name, and then click OK.
17 Click Go, then Applications.
18 Double-click the Utilities folder.

Brother DCP-115C Specifications

General

Print Technology	Inkjet
Print Resolution	Up to 1200 x 6000 dpi
Interface	USB 2.0
Paper Input Capacity	100 sheets
Functions	Print, Copy, Scan
Max. Black Print Speed (ppm)	20 ppm
Max. Color Print Speed (ppm)	15 ppm
Scanner Type	Flatbed
Grayscale Depth	8-bit
Reduction/Enlargement	25% - 400%
Scan Resolution	Optical: Up to 600 x 2400 dpi
Media Types	Envelopes, plain paper, photo paper
Operating System Support	Windows, Mac
Copy Speed Color	11 ppm
Paper Sizes	A4, A5, A6, B5, Letter
Copy Resolution	Up to 1200 x 1200 dpi