Chapter 4
22
e (For DCP-1512)
Press 2 in 1 (ID) Copy.
(For DCP-1612W)
Press 2 in 1 (ID) Copy/Copy Options.
Press a or b to choose Double-sided
ID.
f Place your identification card face down
as shown, towards the top left of the
scanner glass. Make sure the
identification card is at least 0.16 in. (4
mm) from the edges of the glass (1).
1
0.16 in. (4 mm) or greater (top, left)
g Press Start to scan.
h Turn over your identification card and
place it at the left side of the scanner
glass.
1
0.16 in. (4 mm) or greater (top, left)
i Press Start to scan.
To Next Page
Loading...
