Troubleshooting and Routine Maintenance
71
B
CAUTION
If you are not able to find the yellow
protective parts, DO NOT remove the ink
cartridges before shipping. It is essential
that the machine be shipped with either the
yellow protective parts or the ink cartridges
in position. Shipping without them will
cause damage to your machine and may
void your warranty.
d Unplug the machine from the electrical
socket.
e Using both hands, use the plastic tabs
on both sides of the machine to lift the
scanner cover until it locks securely into
the open position. Then unplug the
interface cable from the machine, if it is
connected.
f Lift the scanner cover (1) to release the
lock. Gently push the scanner cover
support down (2) and close the scanner
cover (3).
g Wrap the machine in the bag and put it
in the original carton with the original
packing material.
h Pack the printed materials in the original
carton as shown below. Do not pack the
used ink cartridges in the carton.
i Close the carton and tape it shut.
To Next Page
Loading...
Need help?
General
