Brother DCP-395CN - Scan to Image

USB cable scanning
167
12
Note
• Scan type depends on the settings of the Device Button tab, Black Start or Color Start do not change
the settings.
• If you want to change between color and black and white scanning, choose color or black and white in the
scan type option on the Device Button tab of the ControlCenter configuration screen. (For Windows
®
, see
SCAN on page 57. For Macintosh, see SCAN on page 143.)
Scan to Image 12
You can scan a black and white or color document into your graphics application for viewing and editing.
a Load your document.
b Press (Scan).
c Press a or b to choose Scan to Image.
Press OK.
d Press Black Start or Color Start.
The machine starts the scanning process.
For Touchscreen models
12
a Load your document.
b Press (Scan).
c Press Scan to Image.
d Press Black Start or Color Start.
The machine starts the scanning process.
Note
• Scan type depends on the settings of the Device Button tab, Black Start or Color Start do not change
the settings.
• If you want to change between color and black and white scanning, choose color or black and white in the
scan type option on the Device Button tab of the ControlCenter configuration screen. (For Windows
®
, see
SCAN on page 57. For Macintosh, see SCAN on page 143.)