Brother DCP-540CN - Changing LCD Language; Document Jam (DCP-540 CN Only)

68
Changing LCD language B
You can change the LCD language.
a Press Menu
b Press a or b to select
Initial Setup.
Press OK.
c Press a or b to select
Local Language.
Press OK.
d Press a or b to select your language.
Press OK.
e Press Stop/Exit.
Document jam (DCP-540CN
only) B
Documents can jam if they are not inserted or
fed properly, or if they are too long. Follow the
steps below to clear a document jam.
Document is jammed in the top of the
ADF unit
B
a Take out any paper from the ADF that is
not jammed.
b Open the ADF cover.
c Pull the jammed document out to the
right or left.
d Close the ADF cover.
e Press Stop/Exit.
Note
To avoid future document jams close the
ADF cover properly by pushing it gently in
the middle.
Document is jammed inside the ADF
unit B
a Take out any paper from the ADF that is
not jammed.
b Lift the document cover.
c Pull the jammed document out to the
left.
d Close the document cover.
e Press Stop/Exit.