Brother DCP-9020CDW - Enlarging or Reducing Copies

Chapter 4
14
Enlarging or reducing copies 4
To enlarge or reduce the next copy follow
these steps:
a Load your document.
b Press (Copy).
c Enter the number of copies you want.
d Press Options.
e Swipe up or down, or press a or b to
display Enlarge/Reduce.
f Press Enlarge/Reduce.
g Press 100%, Enlarge, Reduce or
Custom(25-400%).
h Do one of the following:
 If you chose Enlarge, press the
enlargement or ratio you want.
 If you chose Reduce, swipe up or
down, or press a or b to display the
reduction ratio you want and press it.
 If you chose Custom(25-400%),
press to erase the displayed
percentage, or press d to move the
cursor, and then enter an
enlargement or reduction ratio from
25% to 400% in 1% increments.
Press OK.
 If you chose 100%, go to step i.
*
The factory setting is shown in Bold
with an asterisk.
1
Custom(25-400%) allows you to enter a
ratio from 25% to 400% in 1% increments.
i If you do not want to change additional
settings, press OK.
j Press Colour Start or Mono Start.
NOTE
Page Layout is not available with
Enlarge/Reduce.
100%*
200%
141% A5iA4
104% EXEiLTR
97% LTRiA4
94% A4iLTR
91% Full Page
85% LTRiEXE
83% LGLiA4 (DCP-9020CDW)
83% (DCP-9015CDW)
78% LGLiLTR (DCP-9020CDW)
78% (DCP-9015CDW)
70% A4iA5
50%
Custom(25-400%)
1