Brother DCP-9020CDW - Page 138

130
Network
(continued)
WLAN
(continued)
WPS w/ PIN Code — — — You can easily
configure your
wireless network
settings using WPS
with a PIN code.
WLAN Status Status — Active(11b)
Active(11g)
Active(11n)
Wired LAN Active
(DCP-9020CDW)
WLAN Off
AOSS Active
Connection Failed
You can see the
current wireless
network status.
Signal — Strong
Medium
Weak
None
You can see the
current wireless
network signal
strength.
SSID — — You can see the
current SSID.
Comm. Mode — Ad-hoc
Infrastructure
None
You can see the
current
Communication
Mode.
MAC Address — — — Shows the MAC
address of the
machine.
Set to Default ——Yes
No
Restore the
wireless network
settings to factory
setting.
WLAN Enable ——On
Off*
Enable or disable
the wireless LAN
manually.
Wi-Fi Direct Push Button ——— You can easily
configure your Wi
- Fi
Direct
™ network
settings using the
one
- button push
method.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions
Network User’s Guide
Visit the Brother Solutions Center to download the Wi-Fi Direct™ Guide at http://solutions.brother.com/.
Visit the Brother Solutions Center to download the Web Connect Guide at http://solutions.brother.com/
.
The factory settings are shown in Bold with an asterisk.