Brother DCP-9020CDW - Changing Shortcuts

General information
17
1
g Press the function you want.
NOTE
The functions that can be set vary
depending on the selected service.
h Read and confirm the displayed list of
functions you selected, and then
press OK.
i Press OK to save your Shortcut.
NOTE
The Shortcut name will be assigned
automatically. If you want to change the
Shortcut names, see Editing Shortcut
Names on page 18.
Changing Shortcuts 1
You can change the settings in a Shortcut.
NOTE
You cannot change a Web Connect
Shortcut. If you want to change the
Shortcut, you must delete it, and then add
a new Shortcut.
(For more information, see Deleting
Shortcuts on page 18 and Adding Web
Connect Shortcuts on page 16.)
a Press the Shortcut you want. The
settings for the Shortcut that you chose
are displayed.
b Change the settings for the Shortcut you
chose in step a (for more information,
see Shortcut Settings on page 15).
c When you have finished changing
settings, press Save as Shortcut.
d Press OK to confirm.
e Do one of the following:
 To overwrite the Shortcut, press
Yes. Go to step g.
 If you do not want to overwrite the
Shortcut, press No to enter a new
Shortcut name. Go to step f.
f To create a new Shortcut, hold down
to delete the current name, and then
enter a new name using the keyboard
on the Touchscreen. (To help you enter
letters, see Entering text on page 148.)
Press OK.
g Press OK to confirm.