For Network Users
25
3
Web Based Management
(web browser)
The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
Note
•The User Name is
‘
admin
’
and the default
password is
‘
access
’
. You can use a web
browser to change this password.
• We recommend Microsoft Internet Explorer 6.0
®
(or higher) or Firefox
®
1.0 (or higher) for
Windows
®
and Safari™ 1.0 for Macintosh
®
.
Please also make sure that JavaScript and
cookies are always enabled in whichever
browser you use. We recommend you upgrade
to Safari
™
1.2 or higher to enable JavaScript.
To use a web browser, you will need to know the
IP address of the print server.
1 Open your browser.
2 Type http://printer_ip_address / into your
browser (Where “printer_ip_address” is the IP
address of the printer or the print server name).
For example: http://192.168.1.2/
See Chapter 2 of the Network User's Guide
on the CD-ROM.
4
Restoring the network
settings to factory default
To restore all network settings of the internal
Print/Scan server to factory default, please follow the
steps below.
1 Make sure the machine is not in use, then
disconnect all the cables from the machine
(except power cable).
2 Press Menu, 4, 0.
3 Press 1 to select Reset.
4 Press 1 to select Yes.
5 The machine will restart. Re-connect cables
once this is complete.
To Next Page
Loading...
