Brother DCP-9055CDN - 4 Making Copies; How to Copy; Stop Copying; Copy Settings

27
4
4
How to copy 4
The following steps show the basic copy
operation. For details about each option, see
the Advanced User's Guide.
1 No. of Copies
You can enter the number of copies you want
by using the numeric keys.
a Do one of the following to load your
document:
 Place the document face up in the
ADF. (See Using the automatic
document feeder (ADF) on page 25.)
 Load your document face down on
the scanner glass. (See Using the
scanner glass on page 26.)
b Press Mono Start or Colour Start.
Note
If the LCD shows Please Wait and the
machine stops copying while you are
making multiple copies, please wait for 30
to 40 seconds until the machine finishes
the colour registration and cleaning
process of the belt unit.
Stop copying 4
To stop copying, press Stop/Exit.
Copy settings 4
You can change the following copy settings:
Press a or b to scroll through the copy
settings. When the setting you want is
highlighted, press OK. For details about
changing the following copy settings, see
Copy settings in Chapter 3 of the Advanced
User's Guide.
 Enlg/Red (Enlarge/Reduce)
 Stack/Sort
 Quality
 Contrast
 Brightness
 Color Adjust
 Page Layout
 Tray Select
 Duplex
Making copies 4
Contrast:- +
Quality :Auto
Enlg/Red:100%
Tray :MP>T1
Pressab or Start
01
1