Brother DCP-9055CDN - Paper Is Jammed in the MP Tray

88
Paper is jammed in the MP
tray B
If the LCD shows Jam MP Tray, follow
these steps:
a Remove the paper from the MP tray.
b Remove any jammed paper from in and
around the MP tray.
c Fan the paper stack, and then put it back
in the MP tray.
d When loading paper in the MP tray,
make sure that the paper stays under
the maximum paper height guides (1) on
both sides of the tray.
e Press Mono Start or Colour Start to
resume printing.
1