Brother DCP-J1200W - Configure Network Settings Using the Control Panel

Home > Copy > Copy Using Brother Mobile Connect > Copy Settings
Copy Settings
You can configure the copy settings in the Copy screen.
Option Description
Colour/Mono Colour Makes copies in full colour.
Mono Makes copies in monochrome.
Copies Enter the number of copies (1-99).
Quality Select the Copy resolution for your type of document.
Media Type Select a paper type.
If copying on special paper, set the machine for the type of
paper you are using to get the best print quality.
Paper Size Select a paper size.
If copying on paper other than A4 size, you must change the
Paper Size setting.
Density Increase the density to make the text darker.
Decrease the density to make the text lighter.
Page Layout Make N in 1, 2 in 1 ID, or Poster copies.
4 in1
Poster
Enlarge/Reduce Select an option to enlarge or reduce the size of the pages in
your document.
Remove Background Colour Removes the document's background colour in copies. The
white becomes more apparent. This saves some ink and may
make certain copies easier to read.
97