Brother DCP-J132W

2
a Remove the protective tape and film covering
the machine, and also from the LCD.
b Remove the plastic bag a containing the ink
cartridges from on top of the paper tray.
c Make sure you have all the components.
2
Connect the power cord
WARNING
The machine must be fitted with an earthed
plug.
a Connect the power cord.
3
Choose your language
a When the LCD shows this message, press OK.
Select Language
q
Press OK Key
b Press a or b to choose your language and
press OK.
English e
q
Select ab & OK
c Press a (Yes) to confirm the language setting.
NOTE
DO NOT connect the USB cable yet (if you are
using a USB cable).
1
(Example for UK)
NOTE
• The Warning LED on the control panel will stay
on until you have installed the ink cartridges.
• To prolong the life of the print head, provide the
best ink cartridge economy and maintain print
quality, we do not recommend unplugging the
machine frequently and/or leaving the machine
unplugged for extended periods of time. Each
time you plug the machine in, it automatically
cleans the print head, which uses some of your
ink.
We recommend using to power down the
machine. Using allows minimal power to
the machine, resulting in periodic, but less
frequent, cleaning of the print head.
NOTE
If you set the wrong language, you can change it
after setting the date and time. (uuAdvanced
User’s Guide: Changing the LCD language)