Brother DCP-J552DW - Setting the Date and Time

Routine maintenance
53
A
d Press OK.
The machine starts printing the
Alignment Check Sheet.
e For the “A” pattern, press a or b to
display the number of the test print that
has the least visible vertical stripes
(1-9), and then press it.
Press OK.
Repeat this step for the B, C and D
patterns.
In the example number 6 is the best
choice for A, B, C and D.
f Press .
NOTE
Setting the date and
time
A
Setting the date and time allows the machine
to clean the print head regularly and maintain
optimum print quality. It also allows the
machine to name files created when using
the Scan to Media feature.
a Press (Settings).
b Press All Settings.
c Press a or b to display
Initial Setup.
d Press Initial Setup.
e Press Date & Time.
f Press Date.
g Enter the last two digits of the year on
the Touchscreen, and then press OK.
h Enter the two digits for the month on the
Touchscreen, and then press OK.
i Enter the two digits for the day on the
Touchscreen, and then press OK.
j Press Time.
k Enter the time (in 24-hour format) using
the keyboard on the Touchscreen.
Press OK.
(For example, enter 19:45 for 7:45 PM.)
l Press .
i
When the print
alignment is not
adjusted properly,
text looks blurry
like this.
After the print
alignment is
adjusted properly,
text looks like this.